|
| |
PC/104 Wi-Fi Modem
.jpg)
|
|
|
IEEE 802.11b/g/n compatible WLAN
|
|
Support Serial and SPI interface
|
|
Support RTOS and TCP/IP
|
|
Support Wi-Fi Client and Host modes
|
|
-40°C to +80°C operating temperature
|
|
PC104S-W2 |
|
|
PC104S-W2 Wi-Fi Modem is the perfect solution for integrating Wi-Fi wireless applications into PC104 embedded host. The PC104S-W2 Wi-Fi Modem integrates a powerful ARM9 processor with Wi-Fi transceiver. Featuring a self-contained Wi-Fi subsystem, simple connectivity and complete AT command set for different applications, the PC104S-W2 allows OEM integrators to incorporate WiFi wireless technology into a broad range that previously did not feature networking capabilities. It is designed to fully support IEEE802.11b Draft 2.0, IEEE802.11g and IEEE802.11n standards. Features:
- PC/104 interface
- Support PC/104 8bits/16bits connectors
- Support Com Port 1~4, IRQ3~7, IRQ9~12, and IRQ15
- Support Serial and SPI interface
- IEEE 802.11b/g/n compatible WLAN
- Wi-Fi Security Station Mode: WEP-64, WPA-TKIP, WPA-AES, WPA2, WPA2-TKIP
- Wi-Fi Security Access Point Mode: WPA2, WPA2-TKIP
- Support Wi-Fi Client(Station) and Host(Access Point) modes
- No powerful host processor required
- Support RTOS and TCP/IP
- Only need single 3.3V power supply
- Configurable through AT Commands
- Extended operation temperature range of -40°C to +80°C
- FCC/IC/CE Certified
- RoHS Compliant
Rating:
|
Parameter
|
Min
|
Typical
|
Max
|
Units
|
|
Operating Temperature*
|
-40°
|
|
+85°
|
C
|
|
Relative Humidity
(non-condensing)
|
5
|
|
95
|
%
|
|
Voltage Requirement
|
3.15
|
3.3
|
3.6
|
VDC
|
|
Output Power
|
11 (11n)
|
13 (11g)
|
17 (11b)
|
dBm
|
|
Power Consumption-TX mode |
210 (11n Max.) |
250 (11g Max.) |
345 (11b Max.) |
mA |
|
Power Consumption-RX mode |
150 (11n Max.) |
150 (11g Max.) |
150 (11b Max.) |
mA |
* Note: Performance may
degrade some when operating temperature range is
over -30°C or +80°C |
Ordering Information
|
Model
|
Description
|
|
PC104S-W2
.jpg)
|
PC104S-W2 = PC104S + RW8200
Model: PC104S-W2
Containing items:
1 x PC104S
1 x RW8200HM-c
2 x ATN-2d-RP-SMA (optional to include AC6i-RP-SMA)
Accessories:
Model:
ATN-2d-RP-SMA (Replacement antenna, 2.4GHz, 2dBi, RP-SMA and Omni-directional) |
 |
Model:
AC6i-RP-SMA (6" U.FL to RP-SMA female connector antenna cable)-optional |
 |
|
|
PC104S
.jpg)
|
PC104S = with one SPI interface for RW8200
Model: PC104S
|
|
RW8200HM
|
RW8200 WiFi 802.11b/g/n Modules
RW8200HM-c (DIP Module with connectors for external antennas)
|
|
Mechanical Diagram - Top/Side View
.jpg)
Note:
_________________________________________________________________________________________________________ Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners. ^Back to top |
|
| |
|
|
|
