PC/104 3G Cellular Modem
- WCDMA . GPRS . GPS Support
|
|
|
Quad-band 850/900/1800/1900MHz
|
|
Interfaces: USB2.0, UART/RS232, SPI
|
|
SMA connector and SIM socket
|
|
AT command compatible
|
|
-30°C to +80°C operating temperature
|
|
GPIO, ADC ready
|
|
AT&T's wireless network certified
|
|
FCC, CE, PTCRB certifications
|
|
PC104S-C |
|
|
The PC104S-C 3G Cellular Modem is an efficient solution that provides system designers the flexibility to integrate Cellular applications into many different types of embedded host or remote equipment, with minimal engineering resources. The PC104S-C Modems are fully self-contained and require only a PC/104 compatible interface and cellular access network to provide with state of the art data, fax, and voice operation. These modems are designed to meet US AT&T cellular network. Installation is very easy, the PC104S main board has built in one PC/104 buss connector, Serial interface, Com Port jumpers, and IRQ jumpers.
Standard
|
Frequency
|
PC104S-C-E
|
PC104S-C-J
|
PC104S-C-A
|
GSM
|
GSM 850MHz
|
√
|
√
|
√
|
EGSM 900MHz
|
√
|
√
|
√
|
DCS 1800MHz
|
√
|
√
|
√
|
PCS 1900MHz
|
√
|
√
|
√
|
WCDMA
|
WCDMA 850MHz
|
|
√
|
√
|
WCDMA 900MHz
|
√
|
|
|
WCDMA 1900MHz
|
|
|
√
|
WCDMA 2100MHz
|
√
|
√
|
|
HSPA
|
HSDPA
|
√
|
√
|
√
|
HSUPA
|
|
|
|
Features:
- Quad-band: 850/900/1800/1900 MHz
- Compliant with PC/104 Interface
- Support SPI/I2C/GPIO interface
- Support PC/104 8bits/16bits connectors
- Support Com Port 1~4, IRQ3~7, IRQ9~12, and IRQ15
- Full support RTC/CTS flow control
- Support 3G Cellular Network Access
- Provide external multi-band antenna with flexible SMA cable
- Supported mode: Dual-Band UMTS/HSDPA 850/1900MHz, Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz, GPRS, GPS
- AT Command embedded for 3G Cellular network operation
- 3.8 x 3.5 x 0.9 (with PC/104 buss connector but not included RC3000A-E height)
- RC3000A-E FCC/IC/CE certified
- AT&T Cellular device certified
- PC104S FCC/IC/CE certified (pending)
Specifications:
Compliant with PS/104 interface
Operating Temperature: -40℃ ~ +85 ℃
Voltage Requirements: 5V
Output Power
UMTS 850/1900: 0.25 W
UMTS 900/2100: 0.25 W
GSM850/GSM900: 2 W
DCS1800/PCS1900: 1 WMechanical Diagram - Top/Side View
Note:
_________________________________________________________________________________________________________ Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom Research assumes no responsibility for its use, or any infringement of patents or other rights of third parties which may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The information contained herein is subject to change without notice. Logos, trademarks and copyrights are property of their respective owners. ^Back to top |
|